Skip to content
AnIntent

How to Choose a Dehumidifier: Check Capacity and ENERGY STAR at the Source

Why an old pints-per-day figure is a weak comparison, what the ENERGY STAR label tells you, and why portable and whole-home units shouldn't be compared directly.

AnIntent Editorial · · 3 min read

an empty room with a washer and dryer
Photo by Point3D Commercial Imaging Ltd. on Unsplash
In this article
  1. Why the pints-per-day figure needs checking
  2. Which dehumidifier to choose
Share this article

If you are working out how to choose a dehumidifier, start with one rule: don't compare models on the pints-per-day number alone. Pick an ENERGY STAR certified model, and treat any capacity figure from an old listing with caution.

This guide is shorter than most dehumidifier buying guides on purpose. It leaves out sizing charts, efficiency thresholds, capacity figures and drainage advice that could not be confirmed from the official documents.

Why the pints-per-day figure needs checking

The US Department of Energy sets the test procedure that capacity ratings come from. It published a test procedure notice for dehumidifiers in the Federal Register on 26 July 2023 (also available as a PDF on govinfo.gov).

The safe approach is simple: a capacity figure only means something alongside the test it came from. If a used listing, an old review or a forum post quotes a pints-per-day number, don't line it up against a new model's label as if both were measured the same way. Use it as a rough hint, not a basis for choosing between models.

ENERGY STAR certification

A dehumidifier can run for long stretches in a damp basement, so efficiency affects your bill. The simple check is the ENERGY STAR label itself: a certified model has met the program's efficiency requirements, so you don't need to work out the thresholds yourself. This article doesn't list those thresholds because they could not be confirmed. The official source for the current requirements is ENERGY STAR's key efficiency criteria page.

If you come across efficiency or capacity figures quoted from older or draft ENERGY STAR documents, check them against that page rather than assuming they still apply.

The same habit of relying on the certification rather than a retailer's claims applies to other home appliances. Our guide to choosing a smart thermostat uses ENERGY STAR the same way.

Portable or whole-home

ENERGY STAR's key efficiency criteria page distinguishes whole-home units, which tie into ducting, from portable units. They are different kinds of product, so don't compare a portable model's specs directly with a whole-home model's.

How it will be emptied

Before you buy, check how the model you are considering gets rid of the water it collects, and make sure that fits where you plan to put it. Read the manufacturer's specifications for the details.

Which dehumidifier to choose

For most homes: buy an ENERGY STAR certified dehumidifier, compare capacity only between ratings measured under the same test, and confirm the emptying method suits the spot you have in mind. Don't compare a whole-home unit, which ties into ducting, against a portable one on specs alone.

If you are also buying for the cold months, our space heater buying guide covers what to check and where to verify it.

Common questions

Can I compare an old dehumidifier's pints-per-day rating with a new one?

Treat it with caution. The DOE published a dehumidifier test procedure notice in the Federal Register on 26 July 2023, and a capacity figure only means something alongside the test it came from, so use an old figure as a rough hint rather than a basis for choosing.

Where do I find the current ENERGY STAR requirements for dehumidifiers?

On ENERGY STAR's key efficiency criteria page for dehumidifiers. For buying, the ENERGY STAR label on a model tells you it met the program's requirements.

Should I compare a whole-home dehumidifier with a portable one?

Not directly. ENERGY STAR treats whole-home units, which tie into ducting, separately from portable units, so their specs aren't a like-for-like comparison.

Hands typing on a laptop displaying a data spreadsheet
How-to

How to Lock a Cell Reference in Excel: F4, $ and Mixed References

Lock a cell in an Excel formula with $, toggle it with F4 or Cmd+T on a Mac, and know when to use $A$1, A$1 or $A1.

· 4 min

Keep reading