Bluetooth headphones sound bad on calls because opening the microphone switches the connection from A2DP, the stereo profile built for listening, to HFP or HSP, the hands-free profiles that carry audio both ways at lower quality. The headphones aren't broken. Only wideband speech (mSBC) or LE Audio with the LC3 codec improves that calling path, and LE Audio works only when your device and headphones both support it.
What actually happens when you join a call?
Say you're listening to a playlist on your laptop through wireless earbuds and it sounds fine. You click into a video meeting, the mic turns on, and both the meeting and the music suddenly sound flat and boxy. When you leave the meeting, the music sounds normal again.
That's a profile switch. BGR explains that A2DP is the default for listening, and that a call moves the connection to HSP/HFP, which carries audio in both directions but doesn't sound as good. testmyaudio.com puts it the same way: opening the mic drops the link from stereo A2DP to narrowband HFP, and the audio becomes mono.
The trigger is the microphone, not the call. Any app that opens the headset mic can cause the switch, including a voice recorder, a game chat or a browser tab. That's why your audio can turn bad when you aren't on a call at all.
Why can't A2DP and the microphone work together?
With Classic Bluetooth audio, A2DP only sends audio to your ears. Earsole's guide says Microsoft's Classic Audio documentation describes the same split: A2DP handles output, and mic capture needs HFP. So once something asks for the headset mic, the system has to use the hands-free profile for everything, including your music.
Does mSBC wideband speech help?
It helps, but only within the hands-free profile. testmyaudio.com names wideband speech (mSBC) as one of the two things that improve the calling path. It makes HFP calls clearer, but they still don't sound like A2DP music. Whether you get it depends on the headset and the phone or PC, and the sources here don't give a reliable way to check.
What does LE Audio change?
LE Audio is a separate system, not an upgrade to the old profiles. The Bluetooth SIG's LE Audio page says Classic Audio runs on the Bluetooth Classic radio, while LE Audio runs on the Bluetooth Low Energy radio. It adds:
- LC3, a new codec
- Multi-Stream Audio
- Hearing aid support
- Auracast broadcast audio
On the same page, Fraunhofer IIS says listening tests showed LC3 beating SBC, the Classic Audio codec, in audio quality even at a 50% lower bit rate. That efficiency is why LE Audio with LC3 is the other fix testmyaudio.com names for the calling path.
The Bluetooth SIG page itself doesn't talk about calls or microphones, so its quality claims cover LC3 in general, not call audio in particular.
Why doesn't LE Audio fix it for everyone?
Every part of the chain has to support it. Earsole, citing Microsoft's LE Audio guide, says Windows needs compatible hardware, codec and drivers on both the PC and the earbuds. The "Use LE Audio when available" setting also has to be present. A Bluetooth LE logo on the box is not enough by itself.
If your PC or headphones are Classic-only, they fall back to A2DP and HFP and you get the same tinny calls as before. BGR notes that Microsoft has added newer profiles such as TMAP, but they still depend on hardware support.
How do I turn on LE Audio in Windows 11?
According to BGR, you can switch on LE Audio under Settings > Bluetooth & devices > Devices if your hardware supports it. If it's missing, then based on Earsole's reading of Microsoft's guide, some part of the chain probably doesn't support LE Audio: the PC, its driver, or the earbuds. Microsoft also has a support page on configuring Bluetooth LE Audio quality settings in Windows 11.
Can I just stop the switch to hands-free?
Yes, but you lose the headset mic. Two workarounds come up:
- BGR says disabling the Bluetooth Audio Gateway Service turns off hands-free telephony on all audio devices, not only one headset.
Both stop HFP, and HFP is how Classic Bluetooth sends your voice. So these fixes make sense only if you use a separate microphone, such as your laptop's built-in mic or a USB mic. Then the headphones can stay in A2DP and keep full listening quality. The second option affects every paired headset, so pick the first one if you only want to change one device.
What to do differently now
If your audio drops in quality when you aren't on a call, close every app that might be using the mic and listen again. Earsole suggests this as a first test.
For calls where you need to hear well, choose your laptop's mic or a USB mic as the input device and keep the Bluetooth headphones for output only. That way they never leave A2DP.
If you want good audio in both directions over Bluetooth, look for the "Use LE Audio when available" setting on your PC. When you buy new headphones, check for LE Audio and LC3 support, not just a Bluetooth logo.